|Embryology - 1 Dec 2023 Expand to Translate|
|Google Translate - select your language from the list shown below (this will open a new external page)|
العربية | català | 中文 | 中國傳統的 | français | Deutsche | עִברִית | हिंदी | bahasa Indonesia | italiano | 日本語 | 한국어 | မြန်မာ | Pilipino | Polskie | português | ਪੰਜਾਬੀ ਦੇ | Română | русский | Español | Swahili | Svensk | ไทย | Türkçe | اردو | ייִדיש | Tiếng Việt These external translations are automated and may not be accurate. (More? About Translations)
The very size and dynamic nature of embryonic development has always made it a difficult topic to teach. The structures are always so small and the changing nature of development means that a feature you identify at any one time is called, and becomes something else, at a later stage.
Models made from many different media (papier-mâché, ceramic, wax or plastic) not the "animal models" described elsewhere on this site, are very useful in that they make tangible the microscopic structures to the students. Models have been in use for some time in the medical teaching of human development with the original plaster models now replaced by commercial modern plastic versions. Many of the early teaching models were not about development, but about the process of childbirth for doctor and midwife education.
A historic alternative to the use of teaching models, were series of plates and drawings found in textbooks and papers from the late 19th century onwards. At the beginning of the 20th century photography also came into play, seen mainly associated with embryos within the Carnegie collection.
Some links on this page are to both historic non-commercial and modern commercial suppliers of some education models for embryology. In some cases these are museum exhibits only available for viewing. This list is provided for information purposes only and does not indicate an endorsement of these commercial products.
The page is organised from the earliest historic models through to the latest modern models.
- The very latest technology will involve 3D printed and virtual reality models that will allow researchers, educators and students to make their very own models and experience development from new perspectives!
Giuseppe Galletti (? - 1819) these models are currently available for viewing at the Institute and Museum of the History of Science (Italy) "Specimens of obstetric models: the wax models are life-sized; the terracotta versions are reduced to a 1:3 scale. Together with the anatomical waxes in the Specola Museum in Florence, these models are among the most significant examples of the use of artistic techniques for teaching medicine and obstetrics to midwives and surgery students in Florentine hospitals at the end of the eighteenth century."
- Galletti Links: Birth | Week 10 Fetus Model | Week 16 Fetus Model | Week 24 Fetus Model | Stage 1 Terracotta Model 1 | Stage 1 Terracotta Model 2 | Stage 1 Wax Model | Breech Birth 1 | Breech Birth 2 | Breech Birth 3 | Breech Birth Wax Model | Placenta Previa | Category:Galletti1770 | 17th and 18th Century Anatomies | Embryology History
Dr. Louis Thomas Jérôme Auzoux (1797-1880) a French clinician, produced anatomical models at first in wax and later papier-mâché from a factory in St. Aubin d'Ecrosville. These included models of embryonic and fetal development. Commercial model production continued after Dr. Auzoux's death and form part of the Smithsonian Museum collection.
Auzoux Model Workshop
These papier-mâché anatomical models form part of the National Museum of American History's collection. The models were originally constructed in the late 19th century by Louis Thomas Jérôme Auzoux (1797–1880), a French anatomist who made these papier-mâché human and veterinary anatomical models in his Normandy workshop.
The external links listed below show small thumbnail images of the models within this collection.
- Ovary cross-section
- 21 models showing the development of an egg to the thirtieth day of gestation
- Uterus with fetus (1 month)
- Uterus with fetus (2 months)
- Uterus with fetus (3 month)
- Uterus with fetus (5 months)
- Uterus with fetus (8 month)
- Uterus with fetus (9 months)
- Uterus ectopic pregnancy
- Links: Smithsonian National Museum of American History | Human Anatomical Model | Collection Preservation | UK Whipple Collection
Adolf Ziegler (1820 - 1889) a German modeller developed these models at his Studio for Scientific Teaching Models (Atelier für wissenchaftliche Unterrichtsmodelle) from the 1860's onwards of both human and animal embryos. Ziegler's models were first used in Germany, but were also later exhibited in Paris (1867) and Vienna (1873).
His son, Friedrich Ziegler (- 1936), continued the modelling company.
- Links: Ziegler Models
- "At first our record of sections was made by drawing them with the camera lucida or, better still, in a dark room by the aid of a magic lantern. This, however, is a very laborious and time-consuming task, and has a tendency to check the mental activity of the investigator, for unfortunately the work can not be done successfully by a technical assistant. When the collection was transferred to the Carnegie Institution we availed ourselves of the opportunity to install an accurate projection apparatus patterned somewhat after the one used by His (1892). With this apparatus sections of embryo No. 460, previously referred to, were photographed on glass negatives with an enlargement of 50 diameters. Thus it was possible to make several prints. As the photographs were taken with a 50-mm. planar lens, they show all the details wonderfully well."
- "As everything which we wished to reconstruct had to be transferred to wax, it was highly desirable that the final model should be composed of some temperature resisting substance. A method has therefore been devised whereby all the structures desired are eliminated from the wax. Thus, in a block of wax the model is represented in outline by a hole or a series of holes, according to the number of structures to be reproduced, and these holes are subsequently filled with plaster of pans. When this hardens and the wax is removed, the finished plaster model is liberated."
- "This process of modeling depends solely upon absolute accuracy in superposing the wax plates to correspond to the original sections of the embryo. Hence a perpendicular line must be established, and this is done as follows: The wax plates of the sections are placed one upon another until a complete model of the embryo is built up (fig. 3), the construction being guided by photographs of the embryo made before it was cut. Thus it is possible to duplicate accurately the external form of an embryo on an enlarged scale. After this is done it is a simple matter to mark the wax plates in a perpendicular direction that is, by rightangle lines drawn upon every plate through its axis. These constitute what we call guide-lines, the instrument for marking which was invented by Dr. W. H."
- "Lewis (1915) and is known as the Lewis guide liner (fig. 4). After the guide-lines have been drawn on each wax plate they are transferred to the photographs or drawings. This is done by superposing each wax plate upon its photograph or drawing and marking the end of the guide-lines. When the wax plate is removed, these points are connected by lines similar to those on the plates. After the two principal guide-lines have been established, it has been found convenient to use secondary guide-lines, 5 cm. apart, which run parallel to the primary ones over the entire surface of the photograph."
- "In order to make a reconstruction of any portion of an embryo it is necessary first to transfer the outlines of that structure from the photograph to the wax plates by means of carbon paper and a glass point used as a pencil. These outlines are then cut and removed from the wax and the plates squared off along the secondary guide-lines sufficiently far outside of the proposed model not to conflict with its casting."
- "In order that these finished plates, which we call mold plates, may be kept in exact apposition, they are piled in a rectangular corner made of plate glass (fig. 5). While this is being done it is necessary to cut certain artificial channels as vents, so that the air will escape from the openings when the plaster is poured in."
Osborne O. Heard
One of the first to be hired, in 1913, was modeler Osborne O. Heard, who spent 42 years at the department and made over 700 wax-based reconstructions. The results of this team effort still stand as the international standard by which human embryos are described and classified. The models were mainly made by the lost-wax casting process and his models were also more detailed than the earlier (1880's) Ziegler embryo models.
The Blechschmidt Collection, named for Erich Blechschmidt (1904 – 1992), developed methods of human embryo reconstruction from serial sections and generated large models describing the embryonic period of human development. The models include whole surface views as well as detailed views of embryo internal structures.
The collection consists of 64 models and approximately 200,000 serial sections of human embryos. Some of these embryo serial section sets were incorporated in 1972 into the Carnegie Collection (assigned Carnegie Nos. 10315-10434), but have since been returned to the University of Goettingen.
- Links: Blechschmidt Collection
UNSW has a teaching set consisting of 2 series of plaster of paris painted models illustrating various stages of heart separation. The first model set is a series of heart coronal sectioned showing mainly features of atrial septation. The second model set, shown in the linked movies below, illustrate the process of ventricular and outflow tract septation.
|The majority of these external links are to commercial websites that produce mainly plastic models.
The stage 14 model shows the embryo at about the midpoint of embryonic development when the external surface has not yet formed the adult anatomy and has a number of transient structures that are remodelled through the later embryonic stages. It therefore provides an ideal teaching model for demonstrating features such as sensory placodes, pharyngeal arches, limb buds, axial skeleton development, heart and liver surfaces bulges and the umbilicus.
These modern models listed below are available as single and multi-part models that can allow some disassembly to observe structure and relationships.
- Giant Embryo Model
- 2nd Month Embryo
- Fetal Skull, without stand
- Classic Pregnancy Series, 8 Models
- Classic Pregnancy Pelvis 2-part
- Deluxe Pregnancy Pelvis 3-part
- 5 stage Birth Process Model
The Evolution Store
Lippincott Williams and Wilkins
Shanghai Honglian Medical Instrument Development
- Fertilization and Early Development Shows the development from ovum to the fetus in third month.
- Early Development Fecundation to the embryo of fourth week.
- Embryo The embryo model is about 4 weeks old, and mounted on a stand.
- Embryonic Development The model includes 8 parts showing the uterus with embryo and fetus from the first to the seventh month pregnancy.
3D Printing Models
The very latest technology will involve 3D printed models that will allow researchers, educators and students to make their very own models.
Virtual Reality Models
Virtual Reality (VR), also known as immersive multimedia, allows simulation of a physical presence in any designed environment.
External Links Notice - The dynamic nature of the internet may mean that some of these listed links may no longer function. If the link no longer works search the web with the link text or name. Links to any external commercial sites are provided for information purposes only and should never be considered an endorsement. UNSW Embryology is provided as an educational resource with no clinical information or commercial affiliation.
- Smithsonian National Museum of American History | Human Anatomical Model | Collection Preservation
- UK Whipple Collection
- Glossary: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Numbers | Symbols | Term Link
Cite this page: Hill, M.A. (2023, December 1) Embryology Embryology Models. Retrieved from https://embryology.med.unsw.edu.au/embryology/index.php/Embryology_Models
- © Dr Mark Hill 2023, UNSW Embryology ISBN: 978 0 7334 2609 4 - UNSW CRICOS Provider Code No. 00098G