Science Student Projects: Difference between revisions

Revision as of 10:40, 16 August 2012

Introduction

Course coordinator

Since 2009 undergraduate science students have been preparing online group projects as part of their ANAT2341 Embryology course. Each year a main topic is selected in consultation with the course coordinator. Each student group (4-5 students) then selects a specific topic within the main theme that they then research and work collaboratively on that topic throughout the semester. The project is then assessed by their peers before being finally edited for submission as their group assessment component for the course.

These projects are the sole work of undergraduate science students and may contain errors in fact or descriptions.

2012 Sensory Development

Note that the current year (2012) projects are now allocated and students have begun to research their topics. Check back later to see their progress.

2011 Congenital Abnormalities

Cleft Lip and Palate

2010 Diagnostic Techniques

Amniocentesis

2009 Animal Models

Early Mouse Development

Background Information

Project Pedagogy
These projects extend far beyond the original "research poster concept". It requires ongoing participation from both the teacher and the student, if you are not prepared to have an ongoing contribution, do not even consider setting this type of assessment.
Students Groups work independently throughout the semester on a specific topic the group has selected within the general topic set by the teacher. Groups are assigned randomly by the teacher, do not want "friends" and "non-friends" groups. Online work consists of the "project page" and the "discussion page" where student online interaction occurs. Face-to-face time is allowed each week in the last 10 minutes of practical classes. Projects are also presented to the class at a "work in progress" phase. Each student carries out a "online written assessment" of all other projects late in the semester, when groups are near completion. Groups then collate and use these "online written assessments" to edit their own project.	Teacher Designs specific assessment criteria. Designs the general topic and allocates groups. Provides handouts and brief tutorials each week in practical class time on: basic editing, copyright/plagiarism , reference sources and referencing and uploading images. Provides regular in-class advice, online comments and email support to queries and feedback. Analyses project "edit history" and "discussion" comments to identify individual students not contributing to the project. Analyses the final submitted project providing specific online feedback. UNSW Learning and Teaching Seminar 2012

Group Assessment Criteria
The key points relating to the topic that your group allocated are clearly described. The choice of content, headings and sub-headings, diagrams, tables, graphs show a good understanding of the topic area. Content is correctly cited and referenced. The wiki has an element of teaching at a peer level using the student's own innovative diagrams, tables or figures and/or using interesting examples or explanations. Evidence of significant research relating to basic and applied sciences that goes beyond the formal teaching activities. Relates the topic and content of the Wiki entry to learning aims of embryology. Clearly reflects on editing/feedback from group peers and articulates how the Wiki could be improved (or not) based on peer comments/feedback. Demonstrates an ability to review own work when criticised in an open edited wiki format. Reflects on what was learned from the process of editing a peer's wiki. Evaluates own performance and that of group peers to give a rounded summary of this wiki process in terms of group effort and achievement. The content of the wiki should demonstrate to the reader that your group has researched adequately on this topic and covered the key areas necessary to inform your peers in their learning. Develops and edits the wiki entries in accordance with the above guidelines.

Uploading Images

First Read the help page Images

A tutorial will be provided towards the end of the lab in uploading images.

The image must first be uploaded to the site.

Open the left hand menu item “Toolbox” and click “Upload file” and a new window will open.
Click the button ”Choose file” and navigate to where the image is located on your computer and double click the file.
The window will now show the file name in the “Source filename” window.
You can then rename the uploaded file in the “Destination filename” window.
Add a description of the image to the “Summary” window. Note the description must include:
1. An image name as a section heading.
2. Any further description of what the image shows.
3. A subsection labeled “Reference” and under this the original image source, appropriate reference and all copyright information.
4. Finally a template indicating that this is a student image. {{Template:Student Image}}

Images not including the above information will be deleted by the course coordinator and be considered in the student assessment process.

Students cannot delete uploaded images. Contact the course coordinator with the file address.

Referencing

First Read the help page Referencing

All references used in making your project page should be cited where they appear in the text or images.

In page edit mode where XXXX is the PubMed ID number use the following code.

For references not listed on PubMed, and text can be inserted between <ref></ref> tags.

Where the reference list will appear make a new section and on a new line the following code. <references/>

Plagiarism

Currently all students originally assigned to each group are listed as equal authors/contributors to their project. If you have not contributed the content you had originally agreed to, nor participated in the group work process, then you should contact the course coordinator immediately and either discuss your contribution or request removal from the group author list. Remember that all student online contributions are recorded by date, time and the actual contributed content. A similar email reminder of this information was sent to all current students.

Please note the Universities Policy regarding Plagiarism

In particular this example:

"Claiming credit for a proportion of work contributed to a group assessment item that is greater than that actually contributed;"

Academic Misconduct carries penalties. If a student is found guilty of academic misconduct, the penalties include warnings, remedial educative action, being failed in an assignment or excluded from the University for two years.

Please also read Copyright Tutorial with regard to content that can be used in your project.

Before 2009

Prior to 2009, students in ANAT2341 Embryology course worked on similar projects, but in the form of research posters. Towards the end of the course the posters were presented to the class for peer assessment.

Other Assessments

Students also submit individual assessments each week online based upon the practical class they had just completed.
A similar project format is used in the science ANAT3231 Cell Biology course.

Glossary Links

Glossary: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Numbers | Symbols | Term Link

Cite this page: Hill, M.A. (2024, June 26) Embryology Science Student Projects. Retrieved from https://embryology.med.unsw.edu.au/embryology/index.php/Science_Student_Projects

What Links Here?

@@ Line 75: / Line 75: @@
 |}
-===Group Assessment Criteria===
+{| class="wikitable collapsible collapsed"
+! Group Assessment Criteria
+|-
+|
 # The key points relating to the topic that your group allocated are clearly described.
 # The choice of content, headings and sub-headings, diagrams, tables, graphs show a good understanding of the topic area.
@@ Line 87: / Line 89: @@
 # The content of the wiki should demonstrate to the reader that your group has researched adequately on this topic and covered the key areas necessary to inform your peers in their learning.
 # Develops and edits the wiki entries in accordance with the above guidelines.
+|}
+===Uploading Images===
+First Read the help page [[Help:Image_Tutorial|Images]]
+A tutorial will be provided towards the end of the lab in uploading images.
+The image must first be uploaded to the site.
+# Open the left hand menu item “Toolbox” and click “Upload file” and a new window will open.
+# Click the button ”Choose file” and navigate to where the image is located on your computer and double click the file.
+# The window will now show the file name in the “Source filename” window.
+# You can then rename the uploaded file in the “Destination filename” window.
+#Add a description of the image to the “Summary” window. Note the description must include:
+## An image name as a section heading.
+## Any further description of what the image shows.
+## A subsection labeled “Reference” and under this the original image source, appropriate reference and all copyright information.
+## Finally a template indicating that this is a student image. <nowiki>{{Template:Student Image}}</nowiki>
+Images not including the above information will be deleted by the course coordinator and be considered in the student assessment process.
+'''Students cannot delete uploaded images.''' Contact the course coordinator with the file address.
+==Referencing==
+First Read the help page [[Help:Reference Tutorial|Referencing]]
+All references used in making your project page should be cited where they appear in the text or images.
+In page edit mode where XXXX is the PubMed ID number use the following code.
+:<nowiki><ref name=”PMIDXXXX”><pubmed>XXXX</pubmed></ref></nowiki>
+For references not listed on PubMed, and text can be inserted between <nowiki><ref></ref></nowiki> tags.
+Where the reference list will appear make a new section and on a new line the following code. <nowiki><references/></nowiki>
+===Plagiarism===
+Currently all students originally assigned to each group are listed as equal authors/contributors to their project. If you have not contributed the content you had originally agreed to, nor participated in the group work process, then you should contact the course coordinator immediately and either discuss your contribution or request removal from the group author list. Remember that all student online contributions are recorded by date, time and the actual contributed content. A similar email reminder of this information was sent to all current students.
+Please note the [https://my.unsw.edu.au/student/atoz/Plagiarism.html Universities Policy regarding Plagiarism]
+In particular this example:
+:"Claiming credit for a proportion of work contributed to a group assessment item that is greater than that actually contributed;"
+Academic Misconduct carries penalties. If a student is found guilty of academic misconduct, the penalties include warnings, remedial educative action, being failed in an assignment or excluded from the University for two years.
+Please also read [[Help:Copyright_Tutorial|Copyright Tutorial]] with regard to content that can be used in your project.
 ===Before 2009===